Dunes is produced from a high blend of Acrylic resins and natural minerals. Dunes is made up of MMA+PMMA (Methyl Methacrylate + Poly Methyl Methacrylate) plus high performance resins filled with Aluminium Trihydrate (ATH), pigments, matrix chips, cross linking agents, etc. This makes Dunes a superior product in terms of physical, chemical and thermo formable properties.
Subject to minimum quantity & available against specific project requirement in selected colors.
Most countertops have a matte finish. On this finish, rub the stain with an abrasive cleanser such as Ajax or Comet and a maroon or green Scotch-Brite pad with water. Always rub in a circular motion. Rinse and towel dry. Rubbing the entire surface occasionally will maintain the finish.
Hand sand the cut or scratch using 220 grit paper, sanding in a circular motion. Follow by using a 320 or 400 grit paper, again in a circular motion, and rub the area with a maroon or green Scotch-Brite.
Use a non-abrasive cleanser with diluted bleach, rubbing with a white Scotch-Brite pad. Rinse and towel dry. A non-abrasive polish may be used to enhance the shine.
Sand the area as described for a matte finish. Follow with a white rubbing compound such as Soft Scrub applied with a soft cloth and then rub the area with a white Scotch-Brite pad.
If the counter has a polished or high-gloss finish (not recommended for countertops or other high-use or high traffic areas) use a bleaching, non-abrasive cleanser applied with a sponge or use a white polishing compound rubbed with a soft cloth.
Sand the area as described for a semi-gloss finish. Follow with 600 grit paper, always sand in a circular motion. Buff the area with a white polishing compound using a low-speed polisher equipped with a wool pad. If desired, a non-abrasive counter-top polish may be applied. Note:White or maroon Scotch-Brite® pads are usually available at most hardware stores.